SpinNet and Vibro-Spray Sprinklers

Netafim SpinNet Sprinklers produce high levels of watering uniformity with drip-less sprinklers specifically designed for a full range of bedding plant applications.

VALUABLE PRODUCTION TOOL
Automating with Netafim Sprinklers instead of hand watering bedding plants, seedlings, and potted perennials reduces labor costs, improves efficiency and plant quality.

LOW COST AND FAST PAYBACK
Netafim Sprinklers are affordably priced and payback for a complete system is usually within the first season of operation.

DURABILITY AND LOW MAINTENANCE
All sprinklers are made from the highest quality plastics with excellent Ultra-Violet (UV) resistance. These anti-acid plastics will not crack when exposed to normal greenhouse pesticides and fertilizers resulting in a longer life with fewer maintenance issues. SpinNet Sprinklers can be disassembled by hand should they need cleaning - no tools are required.

HIGHLY UNIFORM WATERING
Traditional sprinkler layout spaces the sprinklers "head to head" or at a spacing equal to the radius of the sprinkler throw. For larger areas, the patterns are overlapped creating both wet and dry areas. See diagram to the right. The Netafim solution avoids the problems of the traditional sprinkler layout and achieves a high level of uniformity within a closely spaced "strip of sprinklers". By designing with these "strips" laid out side-by-side, large areas can be covered uniformly. See diagrams below and to the right.

DRIP-LESS SPRINKLERS
SpinNet Sprinklers are constructed without a "bridge" to retain the spinner, producing a drip-less operation. This means that plants located below the sprinklers are not damaged from water dripping off the sprinkler. Sprinklers hang below the supply pipe preventing wetting of the pipe and dripping onto the plants below.

WIDER PATTERNS - UP TO 24'
Since the SpinNet Sprinklers produce a wider pattern (up to 24'), a single line can be used where two were once necessary - saving the grower money and installation time. Higher levels of uniformity and efficiency are possible with single line solutions.

RELIABLE CHECK VALVES
Assembled above the Sprinkler head is a low pressure check valve. The Check Valve prevents the sprinkler line from draining onto the plants below after shut down and guarantees that each sprinkler turns on and off at exactly the same time. This instantaneous on-off is ideal for accurate short cycle watering.

VIBRO-SPRAY SPRINKLERS
Due to its large nozzle and fine spray, this sprinkler is ideal for small plants, propagations, and single benches with widths from 4 to 6 feet placed 2 to 4 feet above the crop. This bridge-less sprinkler provides uniform watering, durability and low maintenance. The average flow rate is 13.6 GPH at a working pressure of 30 psi with spacing between the sprinklers of 3 feet. It can also be used in an upright position connected to rigid pipe.