LOWER COST
Netafim Micronet Foggers are affordably priced - much less than high pressure fog systems.
HIGHLY UNIFORM APPLICATION
With an operating pressure range of 45 to 60 psi, Micronet foggers produce an average droplet size of 90 microns (at 60 psi) each and every time. This creates a "blanket of fog" or zone of saturated humidity ideal for rooting. Each nozzle of the 4-Way Fogger has a flow rate of 2.0 GPH.
DEPENDABLE OPERATION
Since the Micronet Fogger operates on low pressure, there is significantly less wear on the fogger components resulting in less maintenance and reduces overall operating costs. Our fogger system requires 140 mesh filtration eliminating costly filtration systems with intensive maintenance issues. Fogger blockers are available to close off one or more nozzles of the assembly when needed.
SIMPLE INSTALLATION AND DISASSEMBLY
Micronet Foggers are readily adaptable to existing systems. They are easy to install with fittings common to most hanging assemblies. All it takes is a "twist" and the Micronet fogger nozzle can be removed from the center assembly - no tools needed.
RELIABLE CHECK VALVES
Assembled above the Micronet Fogger head is a high pressure check valve. This check valve ensures that each fogger turns on and off at exactly the same time for effective short cycling. It also prevents water from draining onto the plants or cuttings below after system shut down.
COOLING SOLUTIONS
A Single Micronet Fogger is available for cooling applications. It has all the same quality components as a 4-Way Micronet Fogger and a flow rate of 2.0 GPH at 60 psi. For cooling, Netafim recommends placing foggers as high as possible and fine-tuning the cycle time to prevent precipitation. |
About Netafim USA 
