Greenhouse Division Home - Products - Applications - Literature - FAQs - Support - Site Map
Netafim USA
Netafim USA Greenhouse Division

System Components Home Page Link


Valves

 PRODUCT HOME | SYSTEM COMPONENTS HOME | Valves Components Technical Information


Netafim Valves provide superior hydraulic performance for both AC and DC Greenhouse or Nursery systems. Our line of nylon and PVC valves, available in several sizes and flow ranges, offer ease of operation and reliability. These valves provide high resistance to corrosive water containing fertilizers and chemicals. Netafim valves are manufactured with the highest quality materials for dependable operation day after day.








ELECTRIC THROTTLING 2-WAY VALVES (24VAC)
These valves are ideal for ultra high flow or low flow capacity irrigation systems. A built-in 2-way solenoid offers ease of operation and reliability. Standard with a flow control (throttling) handle, large internal water passages for clog resistance and no moving parts in the flow path. The valves can be installed vertically or horizontally and require no maintenance.



ELECTRIC 3-WAY VALVES (24VAC)
Available with nylon or PVC body, these valves offer structural simplicity and operate by pipeline or external pressure. The reinforced rubber diaphragm seals the water passage when the line pressure reaches the valve's control chamber. Only moving component is the diaphragm - no shaft, seals or bearing are located within the water passage resulting in virtually no maintenance. Each valve is simple to install and light-weight with slip or threaded connections.


PRESSURE REDUCING AND PRESSURE SUSTAINING VALVES
Pressure Reducing valves maintain a preset downstream pressure, regardless of upstream pressure or flow rate fluctuation. The main valve is controlled by a 3-way pilot - permitting full opening when downstream pressure drops below the set-point. Available in 2" to 6" sizes, Nylon or PVC body, and threaded or slip connections. Pressure Sustaining valves maintain upstream (inlet) pressure regardless of flow rate variations. The valve will be in the closed" position if the inlet pressure drops below the set-point. It fully opens when upstream pressure exceeds the set-point. Available in 1 1/2" or 2" sizes, nylon body and threaded connection.



AQUANET VALVES (12VDC)
A motorized DC valve with a unique design and glass reinforced nylon body. The small 2mm metering orifice makes the valve extremely debris-resistant. Clog-proof non-continuous 3-way metering operation assures trouble-free operation in all water conditions. Standard with flow control and the three position control dial allows controller operation to be automatic, manual or closed. Available in 3/4" to 2" sizes with threaded connections.


 

Valve Components
Valve Technical Information

 

 



 

Contact About Netafim USA Calendar Careers Site Map Authorized Dealer/Distributor Login Netafim Global
© 2008 NETAFIM USA

 
Netafim USA Logo

 

Netafim USA Home Page Netafim USA Agriculture Division Netafim USA Landscape Division Netafim USA Greenhouse Division Netafim USA Mining Division Netafim USA Wastewater Division